Description
Features:
- Onboard LDO regulators for 2.8V and 1.8V
- Single 3.3V power input
- 2.54mm (0.1 inch) standard pin out
- Open source project www.ArduCAM.com supported
- active array size: 2592 x 1944
- power supply:
core: 1.5VDC + 5% (internal regulator)
analog: 2.6 ~ 3.0V
I/O: 1.7 ~ 3.0V - output formats :
(8-bit): YUV(422/420) / YCbCr422,
RGB565/555/444, CCIR656,
8-bit compression data,
8/10-bit raw RGB data - lens size: 1/4″
- input clock frequency: 6 ~ 27 MHz
- shutter: rolling shutter
- maximum image transfer rate:
5 megapixel (2592×1944): 15 fps (and any size scaling down from 5 megapixel)
1080p (1920×1080): 30 fps
720p (1280×720): 60 fps
VGA (640×480): 60 fps
QVGA (320×240): 120 fps - scan mode: progressive
- pixel size: 1.4 μm x 1.4 μm
- image area: 3673.6 μm x 2738.4 μm
- RAW,RGB,YUV,JPEG output support
- External 1/4 inch high quality M12x0.5 lens
- Camera mount Lens is LS-6018
Pin Out:
|
Pin No. |
PIN NAME |
TYPE |
DESCRIPTION |
|
1 |
VCC |
POWER |
3.3v Power supply |
|
2 |
GND |
Ground |
Power ground |
|
3 |
SCL |
Input |
Two-Wire Serial Interface Clock |
|
4 |
SDATA |
Bi-directional |
Two-Wire Serial Interface Data I/O |
|
5 |
VSYNC |
Output |
Active High: Frame Valid; indicates active frame |
|
6 |
HREF |
Output |
Active High: Line/Data Valid; indicates active pixels |
|
7 |
PCLK |
Output |
Pixel Clock output from sensor |
|
8 |
XCLK |
Input |
Master Clock into Sensor |
|
9 |
DOUT9 |
Output |
Pixel Data Output 9 (MSB) |
|
10 |
DOUT8 |
Output |
Pixel Data Output 8 |
|
11 |
DOUT7 |
Output |
Pixel Data Output 7 |
|
12 |
DOUT6 |
Output |
Pixel Data Output 6 |
|
13 |
DOUT5 |
Output |
Pixel Data Output 5 |
|
14 |
DOUT4 |
Output |
Pixel Data Output 4 |
|
15 |
DOUT3 |
Output |
Pixel Data Output 3 |
|
16 |
DOUT2 |
Output |
Pixel Data Output 2 (LSB) |
|
17 |
PWDN |
Input |
Power down |
|
18 |
RSV |
NC |
Reserved |
|
19 |
DOUT1 |
Output |
Pixel Data Output 1(10bit mode) |
|
20 |
DOUT0 |
Output |
Pixel Data O |
Additional Resources:
