Arducam B003507 Wide Angle Day-Night Vision for Raspberry Pi Camera
Artno.: AC2-200357
Arducam Wide Angle Day-Night Vision for Raspberry Pi Camera, 170 Degree (D) Automatic IR-Cut Switching All-Day Image All-Model Support with IR LEDs and Case

38.90 € incl. 19% VAT
32.69 € excl. VAT
Out of stock

Description

Arducam for Raspberry Pi Camera Module, Night Vision Low Light Fisheye Video Camera for Raspberry Pi 4/3/3 B/3 B+/Zero&W, IR-Cut Switch Automatically

Highlights

? Switch IR Cut Filter Automatically

On for daylight color accuracy, off for IR night vision.

? IR Corrected Lens

Low dispersion glass that greatly reduces Focus Shift and Chromatic Aberration, and focuses the light of different wavelengths on to an image plane at the same location unlike the other lenses

? IR LED Illuminator

Triggered by the light sensor that decides whether the light condition is poor and needs to be improved

? Ultra Wide Angle Lens

This camera module has 170°(D) wide-angle Lens, which provides a much wider field of view compared to the stock lens on the normal camera module


Features

  • Day&Night Image: Built-in motorized IR-CUT Filter, switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night with IR LEDs on), has a better low light performance.
  • Support all Raspberry Pi Models: Work on Raspicam commands and Python scripts. Support Raspberry Pi Zero & W, Pi 4 b, 3 b+, 3 b, and other A&B series.
  • Sharp Image: Adopts 5MP OV5647 sensor, Max. resolution: 2592*1944, more than HD 1080P pixels; High Frame Rate: 30fps@1080P, 60fps@720P, 90fps@480p
  • Ultra Wide Angle of View: This camera module has 170°(D) wide-angle Lens, which provides a much wider field of view compared to the stock lens on the normal camera module.
  • Multiple Camera Cables: 3.3ft (1m) and 5.9in (15cm) 15pin cables for model A and B, 5.9in (15cm) 15 pin to 22 pin cable for Pi zero&w, you can change the cable for different model or usage; Acrylic Holder: Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.

Application

Home surveillance, monitoring 3D printer, wildlife photography, NDVI in agriculture, etc.

Specs

? Sensor

Sensor size: 1/4" (OV5647)

Resolution: 5MP 2592×1944

Video: 1080p 30 fps, 720p 60fps, 480p 90fps

? Lens

Focal Length: 1.3 mm (You can screw the lens for focusing*)

Field of View (FOV): 170° (D) × 140° (H)

Thread Size: M12×P0.5

? Camera Board

3.3V power output for IR LED

Built-in Motorized IR Cut filter

Dimension: 36×36 mm, 4 mounting holes

Package including

1× camera board with 5MP OV5467 sensor and IR corrected lens**

2× IR LED illuminator

2× heat sinks

1×150 mm/5.9" 15 pin cable for Model A and B

1×1 m/3.3' 15 pin cable for Model A and B

1×150 mm/5.9" 15 pin to 22 pin cable for Pi Zero models

1 set camera holder with screwdriver, screws, standoffs, and nuts

Review this product

Average product review

Write your first review and help others with their purchase decision:

Notify me when this product is available

Send me a notification mail when the product is on stock again: