Arducam B0156 1/4" 3 Mega pixel M12 Mount OV3640 Camera Module with JPEG Output

Features:

• Onboard LDO regulators for 2.8V and 1.8V
• Single 3.3V power input
• 2.54mm (0.1 inch) standard pin out
• Open source project www.ArduCAM.com supported
• active array size: 2048 x 1536
• power supply:
  core: 1.5VDC + 5% (internal regulator)
  analog: 2.6 ~ 3.0V
  I/O: 1.7 ~ 3.0V
• output formats :
  (8-bit): YUV(422/420) / YCbCr422,
  RGB565/555/444, CCIR656,
  8-bit compression data,
  8/10-bit raw RGB data
• lens size: 1/4"
• input clock frequency: 6 ~ 27 MHz
• shutter: rolling shutter
• maximum image transfer rate:
  3 megapixel (2048×1536): 15 fps (and any size scaling down from 3 megapixel)
  XGA(1024×768): 30 fps
• scan mode: progressive
• pixel size: 1.75 µm x 1.75 µm
• image area: 3626 µm x 2709 µm
• Interface: Parallel RAW,RGB,YUV,JPEG output
• External 1/4 inch high quality M12x0.5 lens

Documents:

• Lens Spec

Code Reference:

• OV3640 Arduino Example
• OV3640 USB Camera Example

Additional Resources:

• Sensor Datasheet – OmniVision OV3640
• Application Note – OV3640 Camera Module Software
• Lens Options – Arducam M12 Mount Lens Kit, Arducam Low Distortion M12 Mount Lens Kit