Arducam B0183 IMX219 Low Distortion M12 Mount Camera Module for NVIDIA Jetson Nano/Xavier NX
Description
This Arducam IMX219 camera module is mainly designed for NVIDIA® Jetson Nano. The highlight of this camera is its very low distortion (<3%) of the lens.
NOTE: This camera is released for official Jetson Nano/Xavier NX boards. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.
- Shutter Type: Rolling Shutter
- Color Type: Color
- IR Sensitivity: Visible light, Integral IR Filter
- Interface: MIPI
- Format: RAW Bayer
- Platform Support: Jetson Nano
- Sensor type: IMX219
- Optical Size: 1/4 inch
- Lens spec: EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
- Frame Rate: 21fps@8MP, 30fps@1080p, 120fps@720p
- Interface Type: 2-Lane MIPI
- Output format: RAW10
- Unmanned Aerial Vehicles (UAVs)
- Building Drones
- Autonomous Robotic Systems
- Mobile Medical Imaging
- intelligent Video Analytics (IVA)
| SKU | Format | FOV on 1/4" sensor | Focal Length |
| LN006 | 1/4'' | 100° | 1.8mm |
| LN008 | 1/2.5'' | 140° | 1.56mm |
| LN011 | 1/2.5'' | 45° | 4mm |
| LN012 | 1/2.5'' | 55° | 3.6mm |
| LN013 | 1/2.7'' | 75° | 2.8mm |
| LN014 | 1/2.7'' | 90° | 2.1mm |
| LN015 | 1/4'' | 63° | 3.2mm |
- 1pcs Arducam IMX219 Low Distortion Camera Module for NVIDIA Jetson Nano
- 1pcs 1.0mm pitch 15cm 15pin FPC cable
| Shipping weight: | 0.02 Kg |
