Arducam B0216 18MP AR1820HS Camera for Jetson Nano

Item Description:

As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 18MP AR1820HS camera module for Jetson Nano. It incorporates ON Semiconductor 1/2.3-inch CMOS active-pixel digital imaging sensor AR1820HS with 1.25um x 1.25um A-PixHS™ BSI Pixel and can support 18-megapixel (4912H x 3684V) digital still images at 24 fps and a 1080p plus additional 27 percent pixels for electronic image stabilization (2448H x 1378V) in digital video mode at 60 fps and 1080p120 fps.

Features:

Optical format	1/2.3-inch (4:3)
Active pixels	4912H x 3684V
Pixel size	1.25um x 1.25um
Color filter array	RGB Bayer pattern
ADC resolution	12-bit, on-chip
Responsivity	0.62 V/lux-sec (545 nm)
Dynamic range	65.8 dB
SNRMAX	36.3 dB
Output Interface	4-Lane MIPI
Frame Rate	4:3 – 18 Mp full resolution at 15 fps (MIPI-4L) 16:9 – 14 Mp at 20 fps (MIPI-4L) 16:9 – 8 Mp at 30 fps (MIPI-4L) 16:9 – Full HD + 27.5%EIS at 60 fps 16:9 – Full HD at 120 fps
Lens	Default: low distorion M12 lens (Part Number: M27280M07S)
IR Sensitive	build-in 650nm IR filter, none sensitive to IR light

Driver Features:

• Support RAW8/10 bayer format.
• Support Standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
• Support Single Line Driver Installation Command
• Support OpenCV Friendly and Provides Source Code Demonstration

Application:

• Digital video cameras
• Digital still cameras
• Industrial camera
• Medical camera
• Microscopy camera
• UAV camera

Package Including:

• 1 pcs Arducam 18MP AR1820HS Color Camera Module
• 1 pcs Arducam Adapter Board for Jetson Nano
• 1 pcs 80mm 22pin FPC cable
• 1 pcs 150mm 15pin to 22pin FPC cable
• Acrylic case for the camera module

Additional Resources: 

• Arducam Documentation – Arducam Cameras for Jetson Nano
• Video – Arducam MIPI Camera Module for Jetson Nano
• Blog – Arducam MIPI Camera Modules for Jetson Nano