Arducam B0317 ArduCAM USB3.0 Camera Shield Plus

Arducam B0317 ArduCAM USB3.0 Camera Shield Plus

Artnr.: AC2-203170
Hersteller: Arducam

ArduCAM USB3.0 Camera Shield Plus

239,00 €

inkl. 19% MwSt.

(200,84 € exkl. MwSt.)

ausverkauft

Arducam series USB camera shield is a general purpose USB camera control board for PC and embedded signal board computer. It hides the complex nature of the camera and provides the plug and play camera control interface as well as the ready to use SDK library and demo software source code. The Arducam supports variety camera modules from 0.3MP to 21MP or even higher.

Arducam USB3.0 Camera Shield Plus is the latest USB3.0 camera shields, it offers the improved performance and enhanced functions than the previous USB3.0 camera shield. It directly supports MIPI camera, supports RAW hardware decoding, and improves USB3.0 transmission bandwidth.It not only supports high resolution and high frame rate image sensors, but also supports stereoscopy camera and IRCUT control feature. With the given camera configuration files, user can switch between different cameras without any effort. It is the ideal solution for camera evaluation/testing, robot/drone, IoT, machine vision and scientific applications.

Features

Support DVP camera module( 8/10/12bitPixel color depth; RAW/YUV/RGB/JPG; VSYN; PCLK)
Support MIPI camera module( 1/2/4 Lane; RAW8/RAW10 hardware analysis; RAW/YUV/RGB/JPG ) up to 21MP
The maximum output bandwidth of USB3.0 is 360MB
Build-in IRCUT control (optional)
Provide free binary SDK library and demo software source code

Specifications

Bandwidth: 5-Gbps USB3.0 PHY
Camera Databus: 32bit@100MHz
I/O Voltage Standard: 3.3V
Connector: Micro-USB3.0
Size: 40 x 40 mm
Weight: 10g
Power Consumption: 5V/300mA
Operation Temperature: -10?~+55?

Table 1 Featured Camera Modules Supported

DVP camera

Resolution	Frame Rate	Camera Module	Sensor Vendor
1.2MP	54fps	AR0134/AR0135	Aptina
1.3MP	30fps	MT9M001	Micron
1.3MP	15fps	MT9M112	Micron
2MP	15fps	MT9D111	Micron
2MP	15fps	OV2640	Omnivision
2.3MP	30fps	AR0234	ONSemi
5MP	15fps	MT9P001	ONSemi
5MP	15fps	OV5640/OV5642	Omnivision
9MP	9.7fps	MT9N001	Micron
10MP	7.5fps	MT9J001/MT9J003	Aptina
14MP	6fps	MT9F001	Aptina

MIPI camera

Resolution	Frame Rate	Camera Module	Sensor Vendor
0.3MP	120fps	OV7251	Omnivision
1MP	120fps	OV9281	Omnivision
2MP	60fps	OV2311/OG02B10	Omnivision
5MP	15fps	OV5640	Omnivision
5MP	15fps	OV5647	Omnivision
8MP	30fps	IMX219	Sony
12.3MP	24fps	IMX477	Sony
13MP	20fps	IMX135	Sony
16MP	18fps	IMX298	Sony
18MP	15fps	AR1820HS	ONSemi
21MP	13fps	IMX230	Sony

HiSPi camera

Resolution	Frame Rate	Camera Module	Sensor Vendor
14MP	10fps	MT9F002	Aptina

Table 2 Comparison among USB Camera Shield products

	ArduCAM USB2.0 Camera Shield (Rev.E)	ArduCAM USB3.0 Camera Shield	ArduCAM USB3.0 Camera Shield Plus
DVP Camera	support	support(function limited)	support
MIPI Camera	supported(1/2/4 Lane;RAW/YUV/RGB/JPG)	indirect support(Arducam MIPI Adapter Board required)	support
Number of MIPI Lanes	1	1	2 ( support single-lane display and dual-lane synthesis)
RAW8/RAW10 Hardware Analysis	not support	not support	support
USB Interface	USB2.0	USB3.0 (16 bit)	USB3.0 (32 bit)
USB bandwidth	40MB	180MB	360MB
IR-cut	Support (customization required)	Support (customization required)	Support (customization required)