8MP Quad-Camera Kit
This Arducam quadrascopic camera bundle incorporates four 8MP IMX219 cameras, and the cutting-edge MIPI stereo camera breakthrough from Arducam – The Arducam Camarray HAT.
As the upgraded version of Arducam Synched Stereo Camera HAT, the Camarray further pushes the multi-camera limits and doubles the interfacing capabilities to allow 4 synchronized MIPI camera modules to be interfaced to a single MIPI CSI-2 slot on prevailing single-board computers like Raspberry Pi, Jetson Nano, and Jetson Xavier NX.
NOTE
1. The four-channel camera adopts the 2×2 synthesis method. The images of cameras 0 and 1 are completely synchronized, the images of cameras 2 and 3 are completely synchronized, and the images of cameras 2/3 are one frame behind the images of cameras 0/1.
2. The resolution of the synthesized image remains unchanged, but the frame rate is halved.
3. If any camera fails, the composite image can still be output, with the corresponding area of the failed camera being black.
4. Official Commands and ISP are supported.
5. The four-channel camera is a customized model, requiring HAT to provide a clock. It cannot be removed and is directly connected to the Raspberry Pi.
6. This kit is released for official Raspberry Pi/Jetson Nano/Xavier NX boards by default, and it does not support other third-party boards.
Specfication & Comparison Chart
Sensor:1/4" 8MP IMX219 sensor
Output: RAW10/8, COMP8
Lens: Focal Length: 3.04 mm; Angle of View: H=62.2 degree, V=48.8 degree
IR cut Filter: Integral IR filter, visible light only
Resolution and Frame Rate: 8MP@21fps, 1080p@30fps, 720p@120fps
Feature
Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 8MP IMX219 raspberry pi cameras to a single standard pi board and capture images or video at the same time.
Four in One: Combine four cameras into one frame, each with a resolution of 1/4; the maximum output you can get: 3280 x 2464 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera.
Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX, and many more.
Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware.
Packing List
4 ×IMX219 Camera Module
1 ×Arducam Camarray HAT
4 ×15cm 15-22pin Camera FPC Cable
1 ×30cm 15-22pin Camera FPC Cable
1 ×7cm 15-22pin Camera FPC Cable
1 ×Screw Pack
Documentation:
Camarray – Arducam 8MP Synchronized Quad Camera Bundle Kit