Bambu Lab A1/P1/X1 Textured PEI Plate

Artno.: BL9-433042
GTIN: 6975337033042
Manufacturers:

Excellent first-layer adhesion, Self-release, Compatibility with various filaments, Anti-warping, Textured surface finish, Compatibility X1 Series and P1 Series

39,90 €

incl. 19% VAT

(33,53 € excl. VAT)

plus

On stock

The Bambu Dual-Sided Textured PEI Plate, designed for the Bambu Lab P1 Series and X1 Series, offers exceptional first-layer adhesion, improved durability, and compatibility with various filaments. The Bambu Dual-Sided Textured PEI Plate also creates a rugged texture, adding character to your prints.

Considerations

Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. Do not clean the Textured PEI with Acetone, as it will damage the PEI surface.
Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
The latest firmware brings significant improvements to the Bambu Textured PEI Plate calibration using the Micro Lidar, and it is now fully compatible with the automatic calibration process.
The Textured PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

Model Overview

Recommended Settings
Materials	Heatbed Tempe rature	Glue Stick Required	Upper Glass Cover Plate Removed?
PLA/PLA-CF/PLA-GF	45 up to 60 ℃	No	Yes
ABS	90 up to 100 ℃	No	No
PETG/PETG-CF	60 up to 80 ℃	No	No
PET-CF	60 up to 100 ℃	No	No
TPU	35 up to 45 ℃	Yes	Yes
ASA	90 up to 100 ℃	No	No
PVA	45 up to 60 ℃	No	Yes
PC/PC-CF	90 up to 110 ℃	Yes	No
PA/PA-CF/PAHT-CF	90 up to 110 ℃	Yes	No

Product Specification
Material	PEI powder coating + magnetic Stainless Steel Plate
Surface temperature resistance	up to 180 ℃
Flexible stainless steel plate thickness	0.5 mm
Dual-sided PEI sheet thickness	0.075 mm
Usable print size	256 x 256 mm
Package size	300 x 270 x 17 mm
Package weight	450 g
Color	Gold

Extended Specifications

Features

Excellent first-layer adhesion, Improved durability

After optimizing the manufacturing process of the Bambu Texture PEI Plate, the durability of the plate is enhanced. Additionally, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesives.
*In some situations, glue is required for very specific filaments

Self-release when cooled down

PEI is an excellent material for 3D printing applications due to its ability to withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature, and we always recommend waiting until it reaches 35℃ or lower. If the print is still adheres to the plate, simply bend the steel plate and the model will fall right into your hands.

Compatibility with various filaments

PEI allowing it to print not only common materials such as PLA, TPU, and PETG, but also materials that require high temperatures like ABS and Nylon.

Prevent warping with reliable magnetic adhesion

The Bambu Texture PEI Plate features a 0.5mm thick stainless steel plate that enhanced magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing, reducing the likelihood of the first layer detaching due to deformation. It also helps when printing larger models in materials that are prone to warping like ABS, PC and Nylon.

Textured surface finish

Bambu Texture PEI Plate offers a one-of-a-kind first-layer surface. Through the application of a powder-coating process, this PEI Build Plate creates a rugged texture that adds a texture to your prints.

More Features

Shipping weight:	0,40 kg

There are no reviews yet.