Bambu Lab A1 mini Cool Plate SuperTack

Say goodbye to print failures with super reliable surface adhesion! SuperTack coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects and works well with bad shape surface.

Key features

• Reliable surface adhesion
• Durable coating for long-lasting performance
• Natural texture seamlessly hides the bottom surface
• Designed for PLA and PETG

Considerations

• The surface is soft. Be careful when using a scraper to remove printed parts.
• Do NOT print with TPU filament, as it will damage the build plate.
• Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
• Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle.
  • The coating in the specially designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
• Bambu Cool Plate SuperTack is considered a consumable part, which will degrade over time.
  • The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks.
  • Defective sheets upon arrival are the only ones covered by the warranty.
• SuperTack provides good adhesion without adhesive or frequent cleaning.
  • You can clean the surface with water and detergent if heavy dirt appears.
  • Do NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the SuperTack surface.
• Bambu PLA Silk material exhibits strong adhesion on the SuperTack build plate, which may damage printed models.
  • Therefore, we do not recommend using Bambu PLA Silk material on the SuperTack build plate.
  • For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in Bambu Studio and evaluate material compatibility based on the specific conditions.

Model Overview

Features

Eliminates Adhesion Issues

Reduces Warping when Printing Large Objects

The Surface is in Bad Shape? No Problem!

Long Lasting Performance

The SuperTack coating is durable, retaining its sticky properties even after extensive use. This results in a longer lifespan for the printing plate, reducing printing costs (less than 20% adhesion loss after 300 prints) and lowering carbon emissions. (*The test data was produced using PLA Basic filament and completed on the A1 3D Printer.)

Smooth & Natural Surface Finish

The SuperTack coating can impart a smooth and matte texture to the bottom surface of the printed object, better blend-in with other surfaces.

Energy Saving

The SuperTack coating requires only an extremely low heatbed temperature to ensure that printed objects adhere securely. This means you can save a significant amount of energy during heating, leading to lower power bills and, more importantly, helping to protect our planet.

More Features