Bambu Lab P1/X1 Spare Sheet for High Temperature Plate
Description
The Bambu High-Temperature Sheet (Smooth PEI) for X1 Series and P1 Series is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.
Note
The Bambu High-Temperature sheet is easy to replace and install.
- After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.
- You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.
- You can also use detergent and water to clean the surface.
It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.
Model Overview
| Recommended settings for Bambu Cool Plate | |||
|---|---|---|---|
| Materials | Heatbed Tempe rature | Glue Stick Required | Upper Glass Cover Plate Removed? |
| PLA/PLA-CF/PLA-GF | 45 up to 60 ℃ | Recommended | Yes |
| ABS | 90 up to 100 ℃ | Recommended | No |
| PETG | 70 ℃ | Yes | No |
| TPU | 35 ℃ | Recommended | Yes |
| ASA | 90 up to 100 ℃ | Recommended | No |
| PVA | 45 up to 60 ℃ | Recommended | Yes |
| PC/PC-CF | 100 up to 110 ℃ | Yes | No |
| PA/PAHT-CF | 100 up to 110 ℃ | Yes | No |
| Shipping weight: | 0.30 Kg |
Software
Review this product
Average product review
Notify me when this product is available
Send me a notification mail when the product is on stock again:
Send me a notification mail when the product is on stock again:
