Bambu Lab P1/X1E High Temperature Plate

Artno.: BL9-430775
GTIN: 6975337030775
Manufacturers:

Excellent first-layer adhesion, Easy removal, Compatibility with various filaments, Smooth and matte surface, Compatibility X1 Series and P1 Series

31,90 €

incl. 19% VAT

(26,81 € excl. VAT)

plus

Out of stock

The Bambu High Temperature Plate is designed to meet your printing needs effectively. This plate ensures excellent adhesion, facilitating secure print adherence during the process while allowing for easy removal afterward. With its smooth and matte surface finish, your prints are guaranteed to achieve a pristine appearance. Compatible with various filaments, especially PLA, this plate caters to a range of projects. The Bambu High Temperature Plate comprises a Bambu engineering plate coated with a High-Temperature Sheet on one side.

Benefits of Bambu High Temperature Plate

Works best with most 3D printing filaments
Works well with the Automatic Calibration for Flow rate and does not interfere with the LIDAR
Smooth texture on the surface of the print
Excellent adhesion and easy print removal
Can be replaced by the user

Downsides of Bambu High Temperature Plate

It cannot be used without heating the printing surface
Can be more fragile compared to the Engineering Plate or Textured PEI Plate
The upper glass cover plate, or the front glass door need to be opened for filaments with a low glass transition temperature

Considerations

Variations in the color and luster of the Engineering Plate appearance and the removal of the exposed metal areas are just minor adjustments to optimize the production process and surface quality. If the coating remains on the nozzle when the nozzle is wiped, it will be heated and melted before printing the model. Such changes do not affect leveling, Lidar, adhesion, or range of use. You can purchase with confidence!
Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.
Bambu Lab recommends only using Bambu Lab official glue on the build plate, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates.
Regularly clean the print surface with dish soap and hot water to eliminate any dust or grease residue, which might cause bad adhesion. IPA can also work, but the best solution to clean the plate is washing it, to ensure the best performance.
Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
The High-temp smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

Model Overview

Bambu High-Temperature Plate
Materials	Heatbed Tempe rature	Glue Stick Required	Upper Glass Cover Plate Removed?
PLA/PLA-CF/PLA-GF	45 up to 65 ℃	No	Yes
PETG/PETG-CF	60 up to 80 ℃	No	Yes
ABS	90 up to 100 ℃	Recommended	No
ASA	90 up to 100 ℃	Recommended	No
TPU	35 up to 45 ℃	Yes	Yes
PVA	45 up to 60 ℃	Recommended	Yes
PC/PC-CF	100 up to 110 ℃	Yes	No
PA/PA-CF/PAHT-CF	100 up to 110 ℃	Yes	No
PET-CF	80 up to 100 ℃	Yes	No

Bambu Engineering Plate
Materials	Heatbed Tempe rature	Glue Stick Required	Upper Glass Cover Plate Removed?
TPU	30 up to 35 ℃	Recommended	No
PETG/PETG-CF	70 up to 80 ℃	Recommended	Yes
PET-CF	70 up to 800 ℃	Recommended	Yes
ABS	100 up to 110 ℃	Yes	No
PC/PC-CF	100 up to 110 ℃	Yes	No
PA/PA-CF/PAHT-CF	100 up to 110 ℃	Yes	No
Product Specification
Material	Smooth PEI sheet + Spring steel + Engineering Coating
Surface temperature resistance	up to 120 ℃
Flexible spring steel thickness	0.4 mm
High-temp Plate sticker thickness	0.3 mm
Usable print size	256 x 256 mm
Package size	290 x 290 x 4 mm
Package weight	450 g
Color	Black

Extended Specifications

Shipping weight:	0,32 kg

There are no reviews yet.

Contact data

E-Mail

I have read and accepted the privacy statement. ()