Bambu Lab PLA Glow Filament on Spool 15600 Blue
Artno.: BL5-015600
Unique Glow in Low Light Conditions, Diameter 1.75mm +/- 0.03 mm, AMS Compatible, AMS lite Not Recommemded, RFID
Variant
27.90 € incl. 19% VAT
23.45 € excl. VAT
On stock

Shipping time: 1 - 3 business days

Description

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.

Printing Tips

  • Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details, please refer to the Filament Drying Instructions on Bambu Lab Wiki.
  • Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.
  • The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.
  • Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.
  • All printing parameters are embedded in RFID, accessible through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setup steps.

Model Overview

Color Hex Code Display
Glow Green #A1FFAC
Glow Yellow #F8FF80
Glow Pink #F17B8F
Glow Blue #7AC0E9
Glow Orange #FF9D5B
Recommended Printing Settings
Drying Settings (Blast Drying Oven) 55 ℃, 8 h
Printing and Keeping, Container's Humidity <20% RH (Sealed, with Desiccant)
Nozzle Temperature 190 - 230 ℃
Bed Temperature (with Glue) 35 - 45 ℃
Printing Speed < 250 mm/s
Physical Properties
Density 1.26 g/cm³
Vicat Softening Temperature 56 ℃
Heat Deflection Temperature 55 ℃
Melting Temperature 155 ℃
Melt Index 23.3 ± 2.4 g/10 min
Mechanical Properties
Tensile Strength 32 ± 3 MPa
Breaking Elongation Rate 8.6 ± 1.2 %
Bending Modulus 2640 ± 130 MPa
Bending Strength 76 ± 4 MPa
Impact Strength 27.3 ± 2.2 kJ/m²

Package Contents

  • Filament x 1 & Desiccant x 1
  • Package x 1
  • Filament Label x 1

Shipping weight: 1.40 Kg

Review this product

Average product review

Write your first review and help others with their purchase decision: