Bambu Lab Support PA PET Filament on Spool
Description
Bambu Lab's PA/PET Support is detachable support designed specifically for PA, PET, PAHT-CF, PA6-CF, PET-CF, PA-GF, etc. This support material can be easily removed by hand, reducing post-processing time.
Product Features
- Easy removal by hand
- Perfect support interface
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support interface
- Not used for printing models alone
- Dry out before use
- AMS compatible
Printing Tips
- Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying cover on Bambu Lab Wiki.
- All printing parameters are embedded in RFID, which can be read through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
- Feel free to reuse your Bambu Reusable Spool. Bambu Lab has built the entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption.
Model Overview
| Recommended Printing Settings | |
|---|---|
| Drying Settings (Blast Drying Oven) | 80 ℃, 12 h |
| Printing and Keeping, Container's Humidity | <20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 260 - 290 ℃ |
| Bed Temperature (with Glue) | 80 - 110 ℃ |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.17 g/cm³ |
| Vicat Softening Temperature | N/A |
| Heat Deflection Temperature | N/A |
| Melting Temperature | 225 ℃ |
| Melt Index | 29.2 ± 2.1 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N/A |
| Breaking Elongation Rate | N/A |
| Bending Modulus | N/A |
| Bending Strength | N/A |
| Impact Strength | N/A |
Package Contents
- Filament x 1 & Desiccant x 1
- Package x 1
- Filament Label x 1
