Bambu Lab X1/P1/A1 3D Effect Sheets

Artno.: BL9-422536-P
Manufacturers:

2 pieces of textured 3D effect sheets, compatible with the X1/P1/A1 Bambu plates

Variant: 12,90 €Galaxy Surface Sheet

12,90 €Starry Surface Sheet

12,90 €Carbon Fiber Surface Sheet

12,90 €Diamond Surface Sheet

12,90 €

incl. 19% VAT

(10,84 € excl. VAT)

plus

On stock

Please select a model.

Description
Product Reviews

Need some extra pizazz for your prints? Bambu 3D Effect Sheets can transfer interesting surface textures to your printed objects. This combo includes 4 exciting textures, ranging from Diamond all the way to Starry, Galaxy and Carbon Fiber! Want to make your prints stand out? Get Bambu 3D Effect Sheets and unlock a world of textural possibilities!

Note

The 3D Effect Sheets don't come pre-applied on the steel plate. Manual installation is required before use. You can apply the sheet on each side of the steel plate.
For best results, Bambu Lab recommends applying the Bambu 3D Effect Sheets only on the official steel plate from Bambu Lab.
Bambu Engineering Plate (the other side of Bambu Cool Plate/High Temp Plate) can also be used for applying the Bambu 3D Effect Sheets. If you plan to apply a 3D Effect Sheet on an existing plate, ensure that you remove the previous sheet and clean any glue residue completely before installing the 3D Effect Sheet. Make sure the surface is dry and clean before the application.
Please set the Plate Type to Smooth PEI/High Temp Plate and carefully follow the Heatbed Recommended Settings when using the Bambu 3D Effect Sheets.
The 3D effect patterns require a clean surface to remain visible. Grease can cause the patterns to disappear. It is essential to keep the surface clean. Bambu Lab recommends using hot water and detergent for cleaning, and avoid touching the surface.

Considerations

Due to reflections, the LIDAR calibration will not work as expected when using Effect Sheets. Bambu Lab recommends skipping the LIDAR calibration sequence or calibrating with a regular plate.
The 3D Effect Sheets are considered consumables. To prolong the lifespan of the transfer textures, try placing your print objects on different areas of the sheet.
Do not apply glue to the sheet surface.
Pay close attention when using a scraper to remove prints to avoid damaging the sheet surface.

There are no reviews yet.