The LiFePO4wered/Pi+™ is a high-performance battery power system for the Raspberry Pi. It can power a Raspberry Pi for up to nine hours from its battery (depending on installed battery size, Raspberry Pi model, attached peripherals, and system load) and can be left plugged in continuously.
Very few people care about power. It's not glamorous, it's inconvenient that you need it, and it's an afterthought in many projects. Yet, nothing works without it. Have you noticed how many project pictures hide the power supply? Most project pictures have a cable running off somewhere; even supposedly autonomous robots often have an umbilical cord run somewhere out-of-frame. People get excited about the processor, the radio, the servos, etc., but never about the power their creation needs. With LiFePO4wered/Pi+, that's completely fine — you can concentrate on the rest of your awesome project knowing you have a reliable, clean, battery-backed power supply that will keep everything humming along.
Features & Specifications
-
Battery size:
- 18650 size: 1500 mAh 3.2 V LiFePO4 cell
-
High continuous load current whether on battery or external power
- 18650 size: maximum 2 A continuous load current
-
Smart charge controller:
-
Over-charge protection: allows the device to stay plugged in
continuously and provides UPS functionality.
-
Auto-adjusting charge current: charge current up to 1.5 A
when used with high-power chargers, but automatically reduces
current as needed to not overload low power sources.
-
Customizable maximum power point (MPP) voltage: obtain maximum efficiency when powered
directly from suitably sized solar panels.
-
Smart power manager:
-
I2C communication: two-way communication with the Raspberry
Pi enables easy configuration, monitoring, and clean shutdown.
-
Power manager and daemon: work together to ensure clean
shutdowns and provide over-discharge protection, resulting in
long life and high reliability.
-
Continuous monitoring: input voltage, battery voltage,
output voltage, and load current are continuously measured and
checked against user-programmable thresholds for boot, shutdown,
and hard power down.
-
On/off button: provides convenient boot/shutdown triggers
even in headless setups, with press and hold function to prevent
accidental activation (external button can be added).
-
Green PWR LED: indicates the Raspberry Pi power state,
provides feedback to the user (external power LED can be added).
-
Red CHRG LED: indicates power drawn from external input,
whether to charge the battery or power the load (external charge
LED can be added).
-
Wake timer: allows the Raspberry Pi to be off most of the
time and wake up as needed for low duty cycle applications.
-
Real-time clock: keeps track of time when the Raspberry Pi
is off and restores system time on boot, with the ability to
wake up at an absolute time.
-
Auto boot: can maximize uptime by making the Raspberry Pi
run whenever there is sufficient battery power or when external
input power is present.
-
Auto shutdown: can automatically shut the Raspberry Pi down
when input power is removed, either immediately or after a
programmable amount of time.
-
Application watchdog: can alert a user by flashing the PWR
LED or trigger a shutdown/reboot if the user application fails
to service the timer within a configurable amount of time.
-
Open source host-side tools (see GitHub repo):
-
LiFePO4wered daemon: takes care of shutdown and RTC
management.
-
Command line tool: allows simple configuration and access to
all features.
-
Shared library, language bindings: C/C++, Python, and
Node.js bindings allow integration into user programs.
-
Compact physical dimensions
- 18650 size: 52 mm x 75 mm
Stackable Header
The LiFePO4wered/Pi+ attaches to the host board using a header and mounting kit (see below). By default, the header is non-stackable, meaning you can’t add other boards once the LiFePO4wered/Pi+ is attached. However, there’s an option for a stackable header which does allow other boards to be attached and powered.
Mounting Kit
Every LiFePO4wered/Pi+ sold during this campaign will come with a mounting kit to mechanically secure the LiFePO4wered/Pi+ to the Raspberry Pi. The mounting kit consists of two bolts, two nuts, and two spacers.