IkaLogic SP209 USB Logik-Analysator mit 9 Kanälen
Description
The SP209 series logic analyzers and protocol decoders provide detailed analysis of logic signals and protocols with a timing resolution of 200MHz (5ns). They operate with 9 channels, allowing the capture of 8-bit parallel data along with a clock or strobe signal.
The SP Series includes two devices: SP209 and SP209i. Both devices offer 9 logic inputs. However, the SP209i also integrates industrial receivers for CAN, LIN, RS232, and RS485 buses.
Common Uses
The SP series logic analyzers are ideal for demanding applications requiring the capture of logic signals with maximum time resolution on all 9 channels. They are well-suited for:
- Embedded systems debugging
- Research and education
- Serial protocol analysis, such as I2C, SPI, UART, and 1-Wire (not an exhaustive list)
- Industrial bus analysis, including RS232, RS485, CAN, and LIN
- ADC diagnostics
Model Overview
Extended Specifications
| Operating conditions | ||
|---|---|---|
| Temperature | 10°C to 40°C | |
| Relative humidity | <80% non condensing | |
| Altitude | <200 m | |
| Timing and measurements | ||
|---|---|---|
| Sampling rate (MAX.) | 200 MSPS | |
| External clock Max. rate (State mode) | 50 MHz | |
| Logic Inputs digital bandwidth | 50 MHz | |
| Embedded memory | 2 Gb (DDR-3 sampling memory is used to buffer samples before streaming to host computer) | |
| Trigger output | Yes, via SMA connector | |
| External trigger input | Yes, via SMA connector | |
| Logic inputs | ||
| Number of channels | 9 | |
| Input impedance | 200 KΩ || 8 pF | |
| Threshold circuits | 3 | |
| Adjustable logic level(for each threshold) | 1.8, 2.5, 3.3, 5V | |
| Absolute max voltage on digital inputs(Continuous or Transient) | ≤ 25 V | |
| Power requirements | ||
| Input power connector | Micro USB female | |
| Input current | 500 mA | |
| Input voltage | 5 V ≤ 0.25 V | |
| Communication interface | USB 2.0 High Speed | |
| Shipping weight: | 0.50 Kg |
Datasheet (EN)
