PiKVM V4 Mini

PiKVM V4 Mini is an open-source KVM over IP device based on Raspberry Pi. It allows you to manage servers or workstations remotely, regardless of the operating system state. With PiKVM, you can turn your computer on or off, restart it, configure the UEFI/BIOS, and even reinstall the OS using a Virtual CD-ROM or Flash Drive. You can use your own keyboard and mouse remotely, or PiKVM can simulate these along with a monitor, accessible through a web browser as if you were directly using the remote system. This provides hardware-level access without relying on any remote ports, protocols, or services.

Note: USB functionality such as KVM switching is only supported on the PiKVM V4 Plus

Note: USB-C displays are not supported

Features

• Capture video signal up to 1920x1200@60 Hz with audio via WebRTC and H.264 encoding.
• Transfer mouse and keyboard actions to a remote PC
• Full power control of a remote PC: reset or reboot using hardware buttons
• Access and modify all configuration settings, including UEFI/BIOS
• Boot any OS on a controlled PC with mass storage device emulation
• Fanless design with a passive heatsink for quiet operation
• Locator LED for easy device identification
• Low power consumption in idle mode: only 2.67 Watts

Model Overview

Package Contents

• Device
• Micro SD card with pre-imaged PiKVM software
• ATX control board
• ATX connection cables
• ATX installation brackets
• 1 x Ethernet cable
• 1 x ATX cable
• 1 x USB C to USB A cable
• 5V 3.1A USB C Power Supply (international adapters)