The PCBite system effectively secures your circuit board during soldering, inspection, and testing processes. Each holder is equipped with a robust magnet, carefully calibrated for optimal strength. This design includes a low-friction cap at the base to safeguard the magnet, enhancing the holder's ease of movement. The holder's 'jaw' is designed to open widely, complemented by a spring mechanism that provides a firm and reliable grip.
Additionally, the baseplate features a dual finish: one side with a matte texture and the other with a mirror polish. The polished side is particularly useful for a clear view of components located on the underside of the circuit board.
|
SP100 |
SP200 |
| Bandwidth >= f3dB (MHz)* |
DC to 100 MHz |
DC to 200 MHz |
| Rise time (ns), alculated |
3.2 |
1.75 |
| Attenuation Ratio |
10:1 |
| Input Resistance (MΩ), ± 2% |
10 |
| Input Capacitance (pF) |
10 - 14 |
| Full-scale measurement range |
Voltage: +/-60 V DC, 30 V AC RMS, +/-42.4 V pk max. |
| Overvoltage protection(voltage that will not damage) |
200 V DC + peak AC |
| Compensation Range (pF) |
15 - 45 |
| Cable length with BNC |
1.1m |
0.8m |
| Operating Environment, Max. altitude 2 km |
-20 to +60 °C, 0 to 80% RH |
| Storage Environment, Max. altitude 15 km |
-20 to +60 °C, 0 to 80% RH |
| Probe tip diameter (mm) |
0.5 |
| Pollution Degree |
2 (As defined in IEC 61010-031. Only non-conductive pollution. Occasionally, however, a temporary conductivity caused by condensation must be accepted.) |
| RoHS and REACH compliant |
Yes |
There are no reviews yet.
This video cannot be played. Following video types are supported: .mp4, .ogg and .webm .
This video cannot be played. Following video types are supported: .mp4, .ogg and .webm .