Sensepeek 6025 PCBite Oscilloscope Kit (350 MHz), 2x SQ350
Description
The PCBite system effectively secures your circuit board during soldering, inspection, and testing processes. Each holder is equipped with a robust magnet, carefully calibrated for optimal strength. This design includes a low-friction cap at the base to safeguard the magnet, enhancing the holder's ease of movement. The holder's 'jaw' is designed to open widely, complemented by a spring mechanism that provides a firm and reliable grip.
Additionally, the baseplate features a dual finish: one side with a matte texture and the other with a mirror polish. The polished side is particularly useful for a clear view of components located on the underside of the circuit board.
| SQ200 | SQ350 | SQ500 | |
|---|---|---|---|
| Bandwidth >= f3dB (MHz)* | DC to 200 MHz | DC to 350 MHz | DC to 500 MHz |
| Attenuation | 10:1 | ||
| Resistance at probe tip (±2% at DC) | 10MΩ | ||
| Capacitance at probe tip | 13.9 pF | 12.7 pF | 9 pF |
| Scope input impedance | 1MΩ | ||
| Scope x10 pin | Yes | ||
| Maximum working voltage | 150 V RMS CAT I | ||
| Overvoltage protection | 800 V | ||
| Compensation range | 9 to 54 pF | ||
| Cable length with probe and BNC | 1.2m | ||
| Temperature Storage | -40 °C to +60 °C | ||
| Temperature Operating | -20 °C to +50 °C | ||
| Max. humidity (non-condensing) Storage |
80% | ||
| Max. humidity (non-condensing) Operating |
80% to +30 °C, decreasing linearly to 40% at +50 °C | ||
| Max. altitude Storage | 15 km | ||
| Max. altitude Operating | 2 km | ||
| Pollution Degree | 2 (As defined in IEC 61010-031. Only non-conductive pollution. Occasionally, however, a temporary conductivity caused by condensation must be accepted.) | ||
| Weight (probe without holder) | 40 g | ||
| Probe tip diameter (mm) | 0.5 | ||
| RoHS and REACH compliant | Yes | ||
| Shipping weight: | 1.00 Kg |
User Manual (EN)
