The SPS6000X Series is a programmable DC power supply designed for a wide range of applications. It features single-output capabilities with constant power operation.
This series includes two models:
-
SPS6225X: Rated output of 200 V / 25 A
-
SPS6150X: Rated output of 100 V / 50 A
Both models deliver a maximum output power of 1500 W. Up to five SPS6000X chassis of the same model can be connected in parallel to increase output power, meeting diverse application requirements.
The SPS6000X Series is equipped with a high-brightness 3.12-inch OLED display and a user-friendly interface for easy operation and performance monitoring. It provides excellent performance metrics, with a minimum resolution of 10 mV / 10 mA. The output voltage and current rise times are adjustable, and it offers two output modes: constant voltage and constant current. Additionally, it supports list sequence programming for voltage or current step profiles. Safety features include over-voltage, over-current, power limit, and over-temperature protection.
For remote control, the SPS6000X includes LAN and USB communication interfaces, an analog control interface, and web browser access for convenient operation. This series is suitable for a variety of demanding testing environments, such as general laboratory testing, the LED lighting industry, automotive electronics, and other specialized fields.
Key Features
- Rated Voltage: 200 V / 100 V
- Rated Current: 25 A / 50 A
- Rated Power: 1500 W
- Wide range of output voltage and current values in a high-efficiency power supply
- CV, CC priority mode selection for better protection of equipment under test
- Load transient recovery time (Load change from 50~100%) < 2.5 ms
- Adjustable voltage and current slew rates
- Setting and readback resolution: 10 mV, 10 mA
- User-enabled internal output discharge circuit to accelerate output voltage reduction
- Remote Sense function to decrease lead resistance error
- Local list function with up to 50 steps, USB import list sequence file
- External analog voltage control with voltage and current monitoring outputs
- OVP, OCP, LPP, OTP protection
- 3.12-inch OLED high-brightness display with a wide viewing angle of 170 degrees
- Equipped with USB and LAN standard communication interfaces, optional USB-GPIB module
- 44 mm (1U) height, 19" width for convenient rack mounting
- Embedded Web Server offers remote control through a web browser without the need for drivers or additional software
Model Overview
|
SPS6225X |
SPS6150X |
| Rated output voltage |
200 V |
100 V |
| Rated output current |
25 A |
50 A |
| Total rated output power |
1500 W |
| Power Ratio |
3.33 |
3.33 |
| Line Regulation |
40 mV (From 90 ... 132 Vac or 170 ... 265 Vac, constant load) |
5 mV (From 90 ... 132 Vac or 170 ... 265 Vac, constant load) |
| Load Regulation |
100 mV (From no load to full load, constant input voltage) |
50 mV (From no load to full load, constant input voltage) |
| RIPPLE (pk to pk)@220 Vac Input |
220 mV |
120 mV |
|
SPS6225X |
SPS6150X |
| RMS RIPPLE@220 Vac Input |
39 mV |
30 mV |
| Voltage programming Accuracy |
0.1% ± 10 mV |
| Voltage programming resolution |
10 mV |
| Voltage Readback Accuracy |
0.1% ± 20 mV |
| Voltage Readback resolution |
10 mV |
| Temperature coefficient |
100 ppm/°C from rated output voltage following 30-minute warm-up |
| Remote compensation voltage (single wire) |
0.6 V |
| Rise Time (No Load) |
30 ms |
| Rise Time (Rated Load) |
30 ms |
| Fall Time (Rated Load) |
15 ms |
| Output capacitance |
1100 uF |
1760 uF |
| Transient response time |
2.5ms (Time for recovery to within 0.5% of its rated output after the transient from 10% to 90% of the rated output power) |
Extended Specifications
Package Contents
- Device
- USB Cable
- Calibration Certificate
- Quick Start Guide
- Power Cord
- Output guard