Description
Would you like to add a display to your Arduino projects? The I2C OLED breakout board is very convenient for this purpose. Thanks to the high contrast, you will be impressed by the sharpness of the OLED screen. The display consists of a few hundred LEDs, each representing a pixel in the 128x64 grid. This means it does not require a backlight and consumes less power than LCD screens. That's 8192 pixels, all individually illuminated at the push of a button!
The design is rated for 5V with an embedded regulator, making it compatible with any board operating at 3.3V. The board consumes only around 20 mA, but this depends on the number of active pixels. It is easily controlled via the I2C communication protocol. Connecting it with EasyC is even simpler!
Specifications:
- Screen Diagonal: Width of 0.96 inches
- Dimensions: 30 mm x 30 mm
- Power Consumption: ~20 mA (depending on active pixels)
- Logic Voltage: 5V (on I2C header)
- Operating Voltage: 5V (embedded regulator for 3.3V)
- Communication Protocol: I2C (Address: 0x3C)
- Connections: easyC x2
- Pixel Color: White
- Mounting Holes: 2
