Waveshare 16193 L76X GPS HAT

Artnr.: WS1-016193
GTIN: 0614961954243
Hersteller: Waveshare

L76X Multi-GNSS HAT für Raspberry Pi, Unterstützt GPS, BDS, QZSS

29,90 €

inkl. 19% MwSt.

(25,13 € exkl. MwSt.)

zzgl.

ab Lager lieferbar (knapper Bestand)

This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.

It is an easy way to enable global positioning function for your Raspberry Pi.

Features

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports Multi-GNSS systems: GPS, BDS, and QZSS
EASY™, self track prediction technology, help quick positioning
AlwaysLocate™, intelligent controller of periodic mode for power saving
Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
UART communication baudrate: 4800~115200bps (9600bps by default)
Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
4x LEDs for indicating the module working status
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

GNSS Specifications

Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)
- Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch
- C/A code
- SBA: WAAS, EGNOS, MSAS, GAGAN
Horizontal position accuracy:

Autonomous: <2.5mCEP

Time-To-First-Fix @-130dBm (EASY™ enabled):

Cold starts: <15s
Warm starts: <5s
Hot starts: <1s

Sensitivity:

Acquisition: -148dBm
Tracking: -163dBm
Re-acquisition: -160dBm

Dynamic performance:

Altitude (max): 18000m
Velocity (max): 515m/s
Acceleration (max): 4G

General Specifications

Communication interface: UART
Baudrate: 4800~115200bps (9600bps by default)
Update rate: 1Hz (default), 10Hz (max)
Protocols: NMEA 0183, PMTK
Power supply voltage: 5V / 3.3V
Operating current: 13mA
Operating temperature: -40? ~ 85?
Dimensions: 65mm x 30.5mm

Applications

Vehicle tracking
Asset tracking
Security system
Industrial PDA
GIS application

What's on Board

L76B module
CP2102: USB TO UART converter
CAT24C32: EEPROM
RT9193-33: power manager
Backup mode wakeup button
Standby switch
Indicators:
- RXD/TXD: UART RX/TX indicator
- PPS: GPS status indicator
- PWR: power indicator
Raspberry Pi GPIO connector: for connecting with Raspberry Pi
USB TO UART port
GNSS antenna connector
Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
UART selection jumpers
- A: control the L76B through USB TO UART
- B: control the L76B through Raspberry Pi
- C: access Raspberry Pi through USB TO UART