Waveshare 17075 2-CH CAN FD HAT

(1 Bewertungen)

Artnr.: WS1-017075
GTIN: 0614961955608
Hersteller: Waveshare

2-Kanal isolierter CAN FD Erweiterungs-HAT für Raspberry Pi, CAN FD Unterstützung, Multi Onboard Schutzschaltungen

51,90 €

inkl. 19% MwSt.

(43,61 € exkl. MwSt.)

zzgl.

ausverkauft

2-Channel CAN FD HAT for Raspberry Pi

Multi protections, high anti-interference capability, stable operation

Features at a glance

The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with Flexible Data-Rate). It will enable CAN bus for your Raspberry Pi, not only the original CAN 2.0 protocol, but also the CAN FD extension, with higher data throughput.

Thanks to multi onboard protection circuits, including 500W lightningsurge, ESD protection, short circuit protection, and electrical isolation, it make the communication more safe and more reliable.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports both traditional CAN2.0 and CAN FD protocols
Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
Onboard lightningproof, ESD protection, short circuit protection, more safe communication
Onboard voltage translator, select 3.3V/5V operating voltage by jumper
Onboard 120O terminal resistor, configured by jumper
Comes with development resources and manual (examples for Raspberry Pi/Arduino)

Specifications

CAN controller	MCP2518FD
Control bus	SPI
Power supply	External power supply terminal OR Raspberry Pi
Screw terminalinput voltage	DC 8~28V
Operating voltage	5V
Logic level	3.3V/5V
Dimensions	65.0 × 56.5mm

What can it do?

enable isolated and stable CAN FD capability for your Raspberry Pi

Designed for Raspberry Pi series

Standard Raspberry Pi 40PIN GPIO header, customized for Raspberry Pi series boards

2-Channel CAN support

MCP2518FD CAN controller + CAN transceiver chip

up to 4-CH CAN by cascading

onboard SPI0 / SPI1 chip select and interrupt pin configuration, avoid conflicting with other SPI slave devices, also used for cascading to support 4-ch CAN communication * multi HATs required

Jumper	CAN_1 control pin config		CAN_0 control pin config
Jumper	chip select (CE_1")	interrupt (INT_1)	chip select (CE_0)	interrupt (INT_0)
default	SPI1_CE0 (D18)	D24	CE0 (D8)	D25
options	SPI1_CE1 (D17)	D23	CE1 (D7)	D13
options	SPI1_CE2 (D16)	D22
backward compatible	D26	D16

Electrical isolation circuitry safe & stable

SM24CANB TVS diode, ESD protection, transient peak voltage protection

Flexible and handy jumpers

easily select 3.3V / 5V operating voltage, or enable/disable 120O terminal resistor, via onboard jumpers

What's On Board

MCP2518FD controller
Transceiver chip
SI8642ED digital isolator
MP1584EN power chip
RT9193-33 power chip
B0505LS-1W power supply isolation module
Standard Raspberry Pi 40PIN GPIO header
CAN bus screw terminal
External power supply terminal 8~26V DC input
MCU control pins for use with host boards like Arduino

120O terminal resistor switch
3.3V/5V logic level switch
CAN operating mode selection A: CAN_0 and CAN_1 use two separated SPI (default)B: CAN_0 and CAN_1 share a single SPI
Power indicator
Freewheeling diode
SM24CANB TVS diode array
Power supply reverse-proof diode
2A fast resettable fuse

Pinout definition

Outline dimensions

Resources & Services

WIKI: 2-CH_CAN_FD_HAT

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Package Contents

2-CH CAN FD HAT x1
2×20PIN female header x1
Standoffs pack (2pcs) x1

Versandgewicht:	0,03 kg

Durchschnittliche Artikelbewertung

Alle Bewertungen:

Wie funktionieren Bewertungen?

Einträge gesamt: 1

Läuft prima
Das Hat ist jeden Cent wert.
In Grundkonfiguration über ein SPI für beide CAN-FD Controller, wenn man 4 SMD-Brücken tauscht auf zwei getrennten SPI.
Installation Socket CAN nach Wiki problemlos.
Spannungsversorgung noch nicht benutzt.

, 27.05.2020

Einträge gesamt: 1

Kontaktdaten

E-Mail

Ich habe die Datenschutzerklärung gelesen und akzeptiert. ()