Waveshare 18233 MAX-M8Q GNSS HAT

Artnr.: WS1-018233
GTIN: 0614961958050
Hersteller: Waveshare

MAX-M8Q GNSS HAT für Raspberry Pi, Unterstützung für Multi-Konstellationsempfänger

36,90 €

inkl. 19% MwSt.

(31,01 € exkl. MwSt.)

zzgl.

ab Lager lieferbar

MAX-M8Q GNSS HAT

GNSS module based on MAX-M8Q for Raspberry Pi

accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming

This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.

By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi.

Features at a glance

Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption
Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity
Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing
Supports U-Center, an easy way to config the module
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Onboard USB TO UART converter CP2102 for serial debugging
Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32
Baudrate range: 4800~921600bps (9600bps by default)
Supports DDC (I2C compliant) interface: up to 400KHz (max)
Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
4x LEDs for indicating the module operating status
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

GNSS Specifications
MAX-M8Q		GPS & GLONASS	GPS	GLONASS	BeiDou	Galileo
Frequency band		72x u-blox M8 engine channelsGPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, BeiDou B1I, Galileo E1B/C
Horizontal positioning accuracy		2.5m CEP	2.5m CEP	4.0m CEP	3.0m CEP	-
Max navigation update rate		10Hz	18Hz	18Hz	18Hz	18Hz
Time-To-First-Fix	Cold starts	26s	29s	30s	34s	45s
	Hot starts	1s	1s	1s	1s	1s
	Aided starts	2s	2s	2s	3s	7s
Sensitivity	Tracking and navigating	-167 dBm	-166 dBm	-166 dBm	-160 dBm	-159 dBm
	Re-acquisition	-160 dBm	-160 dBm	-156 dBm	-157 dBm	-153 dBm
	Cold starts	-148 dBm	-148 dBm	-145 dBm	-143 dBm	-138 dBm
	Hot starts	-157 dBm	-157 dBm	-156 dBm	-155 dBm	-151 dBm
PPS accuracy	RMS	30ns	30ns	30ns	30ns	30ns
PPS accuracy	99%	60ns	60ns	60ns	60ns	60ns
PPS frequency		0.25Hz…10MHz (configurable)
Velocity accuracy		0.05m/s
Heading accuracy		0.3 degree
Operational limits		Acceleration (max): 4g
		Altitude (max): 50000m
		Velocity (max): 500m/s
other Specifications
Communication interface		UART (4800~921600bps, 9600bps by default), I2C (max 400KHz)
Update rate		1Hz (default), 18Hz (max)
Protocol		NMEA 0183 Version 4.0 (V2.1, V2.3 or V4.1 selectable), UBX, RTCM 2.3
Power supply		5V
Overall current		<40mA@5V (Continue mode)
Module current		23mA@3V (Continue mode, tracking status)
Operating temperature		-40? ~ 85?
Dimensions		65mm × 30.5mm

Standard Raspberry Pi 40PIN GPIO

Compatible with Raspberry Pi series boards, Jetson Nano

Multi-constellation receiver support

concurrent reception of up to 3 types of GNSS satellite systems, and still retains low power consumption

Supports GPS, Beidou, Galileo, and GLONASS

Augment systems support

Augment system is aimed at improving the accuracy, completeness, reliability, and availability of positioning and navigation

Supports augment systems including SBAS, QZSS, IMES, D-GPS

Geo-fencing support

Features -167dBm navigating sensitivity, outstanding ability for anti-spoofing & anti-jamming

software U-Center support

an easy way to config the module

applications

Ideal for fleet management, asset tracking, security systems, industrial PDA, GIS app, etc.

What's on board

MAX-M8Q module
TXS0108EPWR voltage translator
RT9193-33 power chip
CP2102 USB TO UART converter
Status indicators RXD/TXD: UART TX/RX indicator PPS: GPS status indicatorPWR: power indicator
Battery holder supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts

Raspberry Pi GPIO header for connecting with Raspberry Pi
UART, I2C interface for connecting with other MCUs
USB TO UART port
GNSS antenna connector
UART selection jumper A: control the MAX-M8Q through USB TO UART B: control the MAX-M8Q through Raspberry Pi C: access Raspberry Pi through USB TO UART