Waveshare 18606 Compute Module 4 PoE Board

Raspberry Pi Compute Module 4 IO Board mit PoE Funktion, für alle Varianten des CM4

39,90 €

inkl. 19% MwSt.

(33,53 € exkl. MwSt.)

zzgl.

Konfigurieren + Kaufen

Raspberry Pi Compute Module CM4/CM5 Antenna Kit: Zertifiziert für die Verwendung mit dem Raspberry Pi Compute Module 4, Frequenzbereich 2400-2500/5100-5800 MHz, Bandbreite 100-700 MHz
5,90 € Artikeldetails

Menge: 1

Waveshare 18944 ORD-CM4-ANTENNA: Kompatible Antenne für Raspberry Pi Compute Module 4, unterstützt 2.4G/5G WiFi Frequenzband
2,90 € Artikeldetails

Menge: 1

Meanwell GST25E12-P1J Steckernetzteil 12V/2,08A: Steckernetzteil 12V/2,08A, 5,5x2,1mm Hohlstecker
11,90 € Artikeldetails

Menge: 1

Ihre Konfiguration

inkl. 19% MwSt.

(33,53 € exkl. MwSt.)

zzgl.

Compute Module 4 PoE Board

suitable for evaluating the Raspberry Pi CM4 or being integrated into end products

PoE Base Board for all Compute Module 4 Variants

CM4 IO Board	Waveshare mini IO Board		Waveshare PoE IO Board (B)	Waveshare PoE IO Board	Raspberry Pi IO Board
CM4 IO Board	Lite Ver.	Full Ver.	Waveshare PoE IO Board (B)	Waveshare PoE IO Board	Raspberry Pi IO Board
PoE	N/A		integrates 802.3af-compliant PoE circuit (5V/2.5A)		PoE header only
USB	USB 2.0 × 2 USB 2.0 × 2 (via FFC connector)		USB 2.0 × 4	USB 3.2 Gen1 × 4	USB 2.0 × 2 USB 2.0 × 2 (via pin header)
Header	40PIN GPIO × 1 M.2 slot × 1		40PIN GPIO × 1 RS485 × 1 RS232 × 1 standard PCIe Gen 2 × 1	40PIN GPIO × 1	40PIN GPIO × 1 standard PCIe Gen 2 × 1
HDMI	HDMI × 1 HDMI × 1 (via FFC connector) supports 4K 30fps output		HDMI × 2 supports 4K 30fps output
DSI Display	MIPI DSI display port × 1 (15pin 1.0mm FPC connector)		MIPI DSI display port × 2 (15pin 1.0mm FPC connector)	MIPI DSI display port × 2 (22pin 0.5mm FPC connector)
CSI Camera	MIPI CSI-2 camera port × 2 (15pin 1.0mm FPC connector)			MIPI CSI-2 camera port × 2 (22pin 0.5mm FPC connector)
Power Input	5V		5V	7V~36V	12V
Fan	5V		5V / 12V		12V
Fan	no fan control	allows speed adjustment and measurement
RTC	N/A	Real-time clock with battery socket and ability to wake Compute Module 4
Ethernet	Gigabit Ethernet RJ45
CM4 Socket	suitable for all variants of Compute Module 4
SD Card Slot	MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
Dimensions (mm)	85.0 × 56.0		124.50 × 108.80	160 × 90

standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 4

onboard connectors including CSI/DSI/RTC/HDMI/USB/ETH/TF card

CM4 socket suitable for all variants of Compute Module 4
Power input 7~36V wide range power supply
Gigabit Ethernet connector Gigabit Ethernet RJ45 with PoE support
USB SLAVE port allows burning system image into Compute Module 4 eMMC variants
USB3.2 ports 4x USB 3.2 Gen1 ports, for connecting sorts of USB devices
HDMI ports 2x HDMI ports, supports dual 4K 30fps output
RTC RTC battery holder, allows RTC-related functions like wakeup, shutdown, reboot, and more
CAM 2x MIPI CSI camera ports
DISP 2x MIPI DSI display port

FAN for connecting cooling fan, allows speed adjustment and measurement
FAN power selection 5V or 12V voltage to drive the fan
IO-VREF/PoE selection CM4 IO logic level: 3.3V or 1.8V PoE: enable (EN) or disable (DIS)
40PIN GPIO header
CAM0 and DISP0 I2C bus fit the jumpers when using CAM0 or DISP0
Misc configurations
Dual LED indicators red: Raspberry Pi power indicator green: Raspberry Pi operating status indicator
TF card slot (bottom side) insert a Micro SD card with pre-burnt system, to start up Compute Module 4 Lite