Description
Solar Power Manager
Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery
recharged from solar panel, or TYPE-C power adapter5V/3A regulated output
Product features
The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).
The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits , therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects.
- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Flexible battery recharging: from solar panel or USB TYPE-C power adapter
- Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
- Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency
- Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
- PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery
- Several LED indicators, for monitoring the status of solar panel and battery
- Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to use
Specifications
| Solar Power Manager | Solar Power Manager (B) | |
|---|---|---|
| SOLAR IN | 6V ~ 24V | 6V ~ 24V (18V by default) |
| Recharging | Solar panel, power adapter, USB | |
| Battery | 3.7V 850mAh 14500 Li-ion battery (NOT included) | 3.7V 10000mAh Li-po battery |
| USB input | 5V (Micro USB) | 5V (TYPE-C, with PD quick charge support) |
| 5V output | 5V / 1A (USB OUT, pin header) | 5V / 3A (USB-OUT, TYPE-C) |
| Recharging cutoff voltage | 4.2V ± 1% | |
| Over discharging protection voltage | 2.9V ± 1% | |
| Solar panel recharging efficiency | ~78% | |
| USB recharging efficiency | ~82% | ~93% |
| Batteries boost output efficiency | ~86% | ~92% |
| Quiescent current (Max) | <2mA | |
| Case | N/A | Metal case |
| Operating temperature | -40? ~ 85? | |
| Dimensions | 65.2 × 56.2 × 22.9mm | 108.0 × 71.0 × 25.2mm |
Supports 6V~24V solar panels
5-level voltage switch, for setting solar panel input voltage to improve efficiency
Application example
solar-powered control system for MCUs / development boards like: Raspberry Pi / Jetson Nano / Arduino...
More possibilities
Suitable for mini solar road lamp, intelligent agriculture, or IoT applications
Resources introduction
- Solar panel input recharging through DC-002 jack or screw terminal
- TYPE-C recharging/output port supports 5V power adapter for recharging supports PD protocol quick charge adapter supports PD/QC/FCP/PE/SFCP multi protocols output
- USB output port 5V/3A regulated output supports PD/QC/FCP/PE/SFCP multi protocols output
- Battery on/off switch
- BOOT button
- Quick charge indicator
- Solar panel status indicators Solar Warning: lights up if solar panel is reversed Solar Charge: lights up when recharging from solar panel Solar Done: lights up when the battery is fully recharged
- Battery life indicators
Outline Dimensions
Package Contents
- Solar Power Manager (B) x1
- Adapter x1
Review this product
Average product review
Notify me when this product is available
Send me a notification mail when the product is on stock again:
Send me a notification mail when the product is on stock again:
