Waveshare 20157 Compute Module 4 PoE Board (B)

Raspberry Pi Compute Module 4 IO Board mit PoE-Funktion (Typ B), für alle Varianten des CM4

47,90 €

inkl. 19% MwSt.

(40,25 € exkl. MwSt.)

zzgl.

Konfigurieren + Kaufen

Raspberry Pi Compute Module CM4/CM5 Antenna Kit: Zertifiziert für die Verwendung mit dem Raspberry Pi Compute Module 4, Frequenzbereich 2400-2500/5100-5800 MHz, Bandbreite 100-700 MHz
5,90 € Artikeldetails

Menge: 1

Waveshare 18944 ORD-CM4-ANTENNA: Kompatible Antenne für Raspberry Pi Compute Module 4, unterstützt 2.4G/5G WiFi Frequenzband
2,90 € Artikeldetails

Menge: 1

Meanwell GST25E12-P1J Steckernetzteil 12V/2,08A: Steckernetzteil 12V/2,08A, 5,5x2,1mm Hohlstecker
11,90 € Artikeldetails

Menge: 1

Waveshare 19091 PCIe TO M.2 (A): PCIe TO M.2 Adapter, Unterstützt Raspberry Pi Compute Module 4
4,90 € Artikeldetails

Menge: 1

Ihre Konfiguration

inkl. 19% MwSt.

(40,25 € exkl. MwSt.)

zzgl.

Compute Module 4 PoE Board (B)

suitable for evaluating the Raspberry Pi CM4 or being integrated into end products

PoE Base Board for all Compute Module 4 Variants

CM4 IO Board	Waveshare mini IO Board		Waveshare PoE IO Board (B)	Waveshare PoE IO Board	Raspberry Pi IO Board
CM4 IO Board	Lite Ver.	Full Ver.	Waveshare PoE IO Board (B)	Waveshare PoE IO Board	Raspberry Pi IO Board
PoE	N/A		integrates 802.3af-compliant PoE circuit (5V/2.5A)		PoE header only
USB	USB 2.0 × 2 USB 2.0 × 2 (via FFC connector)		USB 2.0 × 4	USB 3.2 Gen1 × 4	USB 2.0 × 2 USB 2.0 × 2 (via pin header)
Header	40PIN GPIO × 1 M.2 slot × 1		40PIN GPIO × 1 RS485 × 1 RS232 × 1 standard PCIe Gen 2 × 1	40PIN GPIO × 1	40PIN GPIO × 1 standard PCIe Gen 2 × 1
HDMI	HDMI × 1 HDMI × 1 (via FFC connector) supports 4K 30fps output		HDMI × 2 supports 4K 30fps output
DSI Display	MIPI DSI display port × 1 (15pin 1.0mm FPC connector)		MIPI DSI display port × 2 (15pin 1.0mm FPC connector)	MIPI DSI display port × 2 (22pin 0.5mm FPC connector)
CSI Camera	MIPI CSI-2 camera port × 2 (15pin 1.0mm FPC connector)			MIPI CSI-2 camera port × 2 (22pin 0.5mm FPC connector)
Power Input	5V		5V	7V~36V	12V
Fan	5V		5V / 12V		12V
Fan	no fan control	allows speed adjustment and measurement
RTC	N/A	Real-time clock with battery socket and ability to wake Compute Module 4
Ethernet	Gigabit Ethernet RJ45
CM4 Socket	suitable for all variants of Compute Module 4
SD Card Slot	MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
Dimensions (mm)	85.0 × 56.0		124.50 × 108.80	160 × 90

standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO headersuitable for all variants of Compute Module 4

onboard connectors including CSI/DSI/HDMI/USB/ETH/PCIe/RS232/RS485

CM4 socket suitable for all variants of Compute Module 4
40PIN GPIO header
BOOT selection ON: CM4 would be booted from USB-C interface OFF: CM4 would be booted from eMMC or Micro SD card
Misc functional pins
USB Type-C power supply / programming 5V/2.5A power supply, also allows burning system image into Compute Module 4 eMMC variants
Status indicators ACT: Raspberry Pi operating status indicator PWR: Raspberry Pi power indicator
DISP 2x MIPI DSI display port
CAM 2x MIPI CSI camera ports
USB2.0 ports 4x USB2.0 ports, for connecting sorts of USB devices

HDMI ports 2x HDMI ports, supports dual 4K 30fps output
RTC battery holder supports CR1220 button cell
FAN header for connecting cooling fan, allows speed adjustment and measurement
PCIe Gen 2 × 1 socket forconnecting PCIe Gen 2 × 1 modules
Gigabit Ethernet connector Gigabit Ethernet RJ45 with PoE support, 10/100/1000M compatible
DC 5V output
RS485 with 600W lightning-proof, anti-surge, and 15KV ESD protection,reversed optional 120R balancing resistor jumper
RS232 with TVS diode, anti-surge, and ESD protection
Buzzer
FAN_VDD/PoE selection cooling fan driving voltage: 12V or 5V PoE: enable (EN) or disable (DIS)

FE1.1S USB expansion chip
PCF52063ATL RTC chip
RTC/FAN I2C bus switch, SDA0/SCL0: I2C-10 is shared with CSI/DSIGPIO3/2: I2C-1 is shared with 40PIN header
IO logic level selection set the CM4 IO logic level as 3.3V or 1.8V

RTC interruption configuration PI-RUN: CM4 will reboot on RTC interruption, GN-EN: CM4 powerdown on RTC interruption, D4: D4 pin is triggered on RTC interruption
Micro SD card slot insert a Micro SD card with pre-burnt system, to start up Compute Module 4 Lite