Waveshare 20232 Pico-Environment-Sensor
Description
Environment Sensors Module for Pico
Features at a glance
The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc. It can also be used to build a robot that can detect motion and orientation.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
- I2C bus, allows retrieving data by just using two wires
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
TSL25911FN digital ambient light sensor | |
---|---|
I2C address | 0x29 |
Effective range | 0~88000Lux |
BME280 temperature, humidity, and air pressure sensor | |
I2C address | 0x76 |
Temperature detection | -40 ~ 85? (0.01? resolution, ±1? accuracy) |
Humidity detection | 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, =2%RH delay) |
Air pressure detection | 300~1100hPa (0.18Pa resolution, ±1hPa accuracy) |
ICM20948 motion sensor (9-dof: 3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer) | |
I2C address | 0x68 |
Accelerometer resolution | 16-bit |
Accelerometer range (configurable) | ±2, ±4, ±8, ±16g |
Gyroscope resolution | 16-bit |
Gyroscope range (configurable) | ±250, ±500, ±1000, ±2000°/sec |
Magnetometer resolution | 16-bit |
Magnetometer range | ±4900µT |
LTR390-UV-1 UV sensor | |
I2C address | 0x53 |
Response wavelength | 280nm - 430nm |
SGP40 VOC sensor | |
I2C address | 0x59 |
Measuring range | 0 ~ 1,000 ppm ethanol equivalent |
Limit condition | < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail) |
Response time | < 10 s (tau 63 %) |
Start time | < 60 s |
On-chip humidity compensation support |
Raspberry Pi Pico header compatibility
onboard female pin header for direct attaching to Raspberry Pi Pico
Raspberry Pi Pico is NOT included.
What's On Board
- TSL25911FN digital ambient light sensor, for measuring IR and visible light
- LTR390-UV-1 UV sensor
- SGP40 VOC sensor
- ICM20948 3-axis accelerometer, 3-axis gyroscrope, 3-axis magnetometer
- Voltage level translator 5V to 3.3V/1.8V
- BME280 temperature, humidity, and air pressure sensor
- Logic level conversion 3.3V-1.8V
- I2C selection
Pinout definition
Outline dimensions
Resources & Services
WIKI: Pico-Environment-Sensor
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Package Contents
- Pico-Environment-Sensor x1
1
Shipping weight: | 0.02 Kg |