Description
Features
|
AT AVRISP mkII compliant - Compatible with AT AVR ISP, easy to use, stable and reliable Based on AT AVRISP mkII firmware - Identified as AVRISP mkII in AVRStudio, high speed programming Upgradable firmware- Firmware is upgradable to Support Future Devices- Automatic Upgrade Supported software - AVR Studio 4/5/6 or WINAVR(GCC) is used as front-end software - Supports the program files generated by IAR, ICCAVR, CVAVR Device Support - USB AVRISP XPII supports all AVR devices with ISP and PDI Interface. Support for new devices will be added with new versions of AVR Studio. - Supports AT86RF401/AT89S51/AT89S52 Refer to AVR Studio 6, the following devices are supported:
Supports all the different voltages and speed grade versions of the devices listed in the table above. Check more supported devices : UC3,Mega,SAM,Tiny,Xmega Performance - High speed programs FLASH , EEPROM, Fuses, and Lock Bit - It takes only 2.5S to program a 12K program file with verification (programming speed was set to 1M while the Max speed could be up to 8M) Connects to PC - Uses a USB interface for communication with the front-end software (Probably AVR Studio) - Using PDIUSBD12, USB 1.1 (USB 2.0 Full Speed) 12Mbits/second - Each USB AVRISP XPII has a unique ID, a PC could connects to several Devices at the same time Connects to target boardThe USB AVRISP XPII connects to the target board through 3 optional cables. Depending on the existed connector on the target board, the cable has to be changed accordingly.- Standard 6-pin ISP Connector, Using 6-pin ISP cable- Standard 10-pin ISP Connector, Using 6-pin to 10-pin ISP cable- Custom ISP Connector, Using 6-wire multicolour custom connector cableThe figure 1 and 2 shows the pinouts for the 10-pin and 6-pin ISP connectors.
|
Downloads
Development resources: user guide, software, etc. Wiki: www.waveshare.com/wiki/USB_AVRISP_XPII
Selection Guide
Programmer | ISP-6PIN | ISP-10PIN | ISP Custom | Connect to PC | Speed | Supported AVR Studio |
---|---|---|---|---|---|---|
USB AVRISP CH | directly support | via adapter cable | via adapter cable | USB TO COM (CH340G) | ★★★☆ | 4/5/6/7 |
USB AVRISP PL | via adapter cable | directly support | via adapter cable | USB TO COM (PL2303TA) | ★★★ | 4 or lower version |
AT AVRISP | - | directly support | - | Serial port | ★★★ | 4 or lower version |
USB AVRISP XPII | directly support | via adapter cable | via adapter cable | USB(PDIUSBD12) | ★★★★★ | 4/5/6/7 |
AT AVRISP MKII | directly support | via adapter cable | - | USB(PDIUSBD12) | ★★★★★ | 4/5/6/7 |
Shipping weight: | 0.15 Kg |