Bambu Lab Support ABS Filament on Spool 66100 for ABS - White
Artno.: BL5-966100
Breakaway Support, Easy Support Removal, Superior Support Interface Quality, Comes with High Temperature Reusable Spool, Diameter: 1.75 mm +/- 0.05 mm, ONLY used for support, RFID
Variant
16.90 € incl. 19% VAT
14.20 € excl. VAT
On stock (short supply)

Shipping time: 1 - 3 business days

Description

Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!

Product Features

  • Easy Support Removal
  • Superior Support Interface Quality
  • AMS Compatible

Accessory Compatibility

Recommended Not Recommended
Build Plate Smooth PEI Plate, Textured PEI Plate /
Hotend 0.4 mm / 0.6 mm / 0.8 mm 0.2 mm
Bambu Liquid Glue / Glue Stick Bambu Liquid Glue / Glue Stick /

Printing Tips

  • Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.
  • Pungent and unpleasant odors may be released during printing. Ensure your printer is enclosed and placed in a well-ventilated area.
  • When layer strength is required, it is recommended to increase the flushing volume to above 800 mm3. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.
  • By increasing the "initial layer speed," a more peelable support can be obtained. However, this will increase the risk of warping.
  • Dry the filament before use for higher print quality. Drying conditions: 80℃ for 4 hours in the blast drying oven; 85 - 95 ℃ for 6 hours in the X1 Series Heatbed. Please refer to the filament drying instructions on the Bambu Lab WIKI.
  • For more support-related settings, please refer to the support section on the Bambu Lab WIKI.

Model Overview

Support for PLA/PETG Support for PLA/PETG Support for ABS Support for PA/PET PVA
Color Nature White & Black White Green Clear
Nozzle Type All Size / Material All Size / Material 0.4 / 0.6 / 0.8 mm 0.4 / 0.6 / 0.8 Hardened Steel All Size / Material
Nozzle Temperature 190 - 220 ℃ 220 - 230 ℃ 240 - 270 ℃ 280 - 300 ℃ 220 - 250 ℃
Bed Temperature 35 - 60 ℃ 35 - 45 ℃ 80 - 100 ℃ 80 - 100 ℃ 35 - 45 ℃
Printing Speed < 100 mm/s < 200 mm/s < 100 mm/s < 100 mm/s < 200 mm/s
Solubility Water-insoluble Water-insoluble Water-insoluble, limonene-dissolvable Water-insoluble Water-dissolvable
Dry before Use Optional Optional Optional Required Required
Dry Protection during Use Optional Optional Optional Required Required
Filament Compatibility PLA, PETG PLA ABS PAHT-CF,PA6-CF,PA6-GF, PET-CF PLA, PETG
Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 ℃, 8 h
Printing and Keeping, Container's Humidity <20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 ℃
Bed Temperature (with Glue) 80 - 100 ℃
Printing Speed < 100 mm/s
Physical Properties
Density 1.16 g/cm³
Vicat Softening Temperature N/A
Heat Deflection Temperature N/A
Melting Temperature 185 ℃
Melt Index 11.6 ± 0.7 g/10 min
Mechanical Properties
Tensile Strength N/A
Breaking Elongation Rate N/A
Bending Modulus N/A
Bending Strength N/A
Impact Strength N/A

Package Contents

  • Filament x 1 & Desiccant x 1
  • Package x 1

Shipping weight: 1.20 Kg

Review this product

Average product review

Write your first review and help others with their purchase decision: