Description
PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a default printing speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to new heights.
It effectively addresses common issues such as oozing and clumping associated with regular PETG, ensuring smoother and more reliable prints. The new matte finish not only enhances the aesthetic by smoothing out uneven gloss during speed transitions but also provides a consistently uniform look.
Offering greater durability and toughness than PLA, PETG HF is the ideal choice for creating long-lasting items with an improved finish and faster production times.
Note: PETG HF must be dried before use to achieve optimal print quality.
Key features
- As easy to print as PLA
- Higher printing speed
- Reduced oozing
- Outdoor durability
Accessory Compatibility
Recommended | Not Recommended | |
---|---|---|
Build Plate | Smooth PEI Plate,Textured PEI Plate | Cool Plate |
Hotend | All Size / Material | / |
Glue | Bambu Liquid Glue Glue Stick |
/ |
PETG HF Hex Code Table
Color | Hex Code | Display |
---|---|---|
Yellow | #FFD00B | |
Orange | #F75403 | |
Green | #00AE42 | |
Red | #EB3A3A | |
Blue | #002E96 | |
Black | #000000 | |
White | #FFFFFF | |
Cream | #F9DFB9 | |
Lime Green | #6EE53C | |
Forest Green | #39541A | |
Lake Blue | #1F79E5 | |
Peanut Brown | #875718 | |
Gray | #ADB1B2 | |
Dark Gray | #515151 |
Printing tips
- Dry out before use for higher printing quality. PETG HF must be dried before use and remain moisture-free during the printing process, especially for longer print times (over 6 hours).
- Drying conditions: 65℃ for 8 h in the Blast Drying Oven; 75 - 85℃ for 12 h in the X1 Series Heatbed. For more details please refer to: Filament Drying Recommendations on Bambu Lab WIKI. Please note that the spool can withstand the higher temperature for drying on the heatbed.
- Feel free to reuse your Bambu Reusable Spool. Bambu Lab has designed the entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption.
- All printing parameters are embedded in RFID, which can be read through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
- Although PETG-CF is compatible with AMS, it's not ideal for AMS Lite.
Model Overview
PLA Basic | PETG HF | PETG Basic | |
---|---|---|---|
Printing Speed* | ∼ 300 mm/s | ∼ 300 mm/s | ∼ 200 mm/s |
Preset Printing Speed* | 258 mm/s | 258 mm/s | 172 mm/s |
Strength (Bending Strength - XY) | 76 MPa | 64 MPa | 65 MPa |
Stiffness (Bending Modulus - XY) | 2750 MPa | 2050 MPa | 1670 MPa |
Layer Strength (Bending Strength - Z) | 59 MPa | 48 MPa | 48 MPa |
Layer Adhesion (Impact Strength - Z) | 13.8 kJ/m² | 10.6 kJ/m² | 13.6 kJ/m² |
Toughness (Impact Strength - XY) | 26.6 kJ/m² | 31.5 kJ/m² | 52.7 kJ/m² |
Heat Resistance (HDT, 0.45 MPa) | 57 °C | 69 °C | 69 °C |
Recommended Printing Settings | |
---|---|
Drying Settings (Blast Drying Oven) | 65 ℃, 8 h |
Printing and Keeping, Container's Humidity | <20% RH (Sealed, with Desiccant) |
Nozzle Temperature | 230 - 260 ℃ |
Bed Temperature (with Glue) | 65 - 75 ℃ |
Printing Speed | < 300 mm/s |
Physical Properties | |
Density | 1.28 g/cm³ |
Vicat Softening Temperature | 70 ℃ |
Heat Deflection Temperature | 69 ℃ |
Melting Temperature | 214 ℃ |
Melt Index | 28.2 ± 2.7 g/10 min |
Mechanical Properties | |
Tensile Strength | 34 ± 4 MPa |
Breaking Elongation Rate | 8.6 ± 1.2 % |
Bending Modulus | 2050 ± 120 MPa |
Bending Strength | 64 ± 3 MPa |
Impact Strength | 31.5 ± 2.2 kJ/m² |
Package Contents
- Filament x 1 & Desiccant x 1
- Package x 1
Features
Shipping weight: | 1.40 Kg |